New VHF channels

WA Department of Fire and Emergency Services (6AR and 6IP) (Including the Fire Services, SES & VMRS) and Department of Biodiversity, Conservation and Attractions

Moderator: bogged

Post Reply
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:
Contact vk6hgr

New VHF channels

Post by vk6hgr »

Hi Folks.

Looks like 164.2750MHz on the new VHF system is active and linked to 6AR/6IP.

There may be others :)
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
Top
yorky
Moderator
Moderator
Posts: 2636
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Post by yorky »

Any ideas where its located? ACMA search isn't working...
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator
Top
Fastlane
WARSUG top poster
WARSUG top poster
Posts: 1658
Joined: Wed Jul 06, 2005 4:24 pm
Amateur callsign: VK6FLMZ

Re: New VHF channels

Post by Fastlane »

vk6hgr wrote:Hi Folks.

Looks like 164.2750MHz on the new VHF system is active and linked to 6AR/6IP.

There may be others :)
Hackett's Gully.

There's a few other repeaters that are up, though not linked anywhere.
Top
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:
Contact vk6hgr

Post by vk6hgr »

164.000Mhz is also active.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
Top
AVBFS
Posts: 73
Joined: Mon Sep 01, 2008 4:37 pm
Scanners and Receivers: UBCT9

Post by AVBFS »

vk6hgr wrote:164.000Mhz is also active.
where's that located??
:mrgreen:
Top
robbage
Moderator
Moderator
Posts: 2993
Joined: Sat Feb 09, 2008 10:06 am
Amateur callsign: VK6UFO_VK6RN
Scanners and Receivers:  
Scanners/receivers
Diamond Welz WS1000 wideband handheld
Radioshack Pro 28 handheld
Uniden UBC72XLT handheld
Uniden UBC73XLT handheld
Uniden UBC330CRS desktop

Two-way
Yaesu VX-3R 2m/70cm Ham TRX and wideband RX handheld
Yaesu FT-1802M 2m Ham TRX mobile x 2
Yaesu FT-7800R 2m/70cm Ham TRX and wide band RX mobile
Icom IC-208H 2m/70cm Ham TRX and wide band RX mobile
Icom IC-706MKIIG all-band all-mode Ham TRX mobile
Icom IC-V85 2m VHF Ham TRX handheld
Wouxun KG-UVD1P VHF/UHF wideband Ham TRX handheld
Wouxun KG-679P VHF wideband Ham TRX handheld
Wouxun KG-713 UHF wideband Ham TRX handheld
Location: Just on the border of your waking mind

Post by robbage »

ACMA search is back on line. It was off for a major maintenance event.

164.000 is Cocos Is, Xmas Is or Canning Mills. Wonder which one you heard :)
Last edited by robbage on Sat Oct 18, 2008 2:38 pm, edited 1 time in total.
Rob
OF78WD
 Amateur moderator
.
→Arguing with a fool proves there are two
Top
WPXZBP

Re: New VHF channels

Post by WPXZBP »

vk6hgr wrote:There may be others :)
There are, or will be. ;)
Top
Fastlane
WARSUG top poster
WARSUG top poster
Posts: 1658
Joined: Wed Jul 06, 2005 4:24 pm
Amateur callsign: VK6FLMZ

Post by Fastlane »

robbage wrote:ACMA search is back on line. It was off for a major maintenance event.

164.000 is Cocos Is, Xmas Is or Canning Mills. Wonder which one you heard :)
Canning Mills is where the existing Chan 55 lives. The Hackets Gully site is where the existing Chan 25 is.
Top
yorky
Moderator
Moderator
Posts: 2636
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Post by yorky »

Then what's the advantage to these new frequencies?
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator
Top
wasaint
150+ posts
150+ posts
Posts: 247
Joined: Fri Nov 09, 2007 3:12 pm

Post by wasaint »

We Have the New system in our trucks now and it is So much Clearer it is def worth it the canning Mills one was only turned on on Monday adn we havent had the chance to do much of a range terst but a cpl of our old Black spots have been clear so fingers crossed its a good thing
Top
wasaint
150+ posts
150+ posts
Posts: 247
Joined: Fri Nov 09, 2007 3:12 pm

Post by wasaint »

excuse the spelling kids are bugging so not concertrating lol
Top
WPXZBP

Post by WPXZBP »

The change was made to improve interoperability - FESA appliances etc can link with things like boats using Marine radio. The option is there for SJA to come on board if they wish. Appliances now have access to Emergency channels A & B on UHF.
Top
Nick
150+ posts
150+ posts
Posts: 271
Joined: Thu Jan 26, 2006 11:55 am

Post by Nick »

SJA already have access to ESA and ESB ,they are the license holders.
Might give the SES some advantage as well with marine and general FESA interoperability.
Top
WPXZBP

Post by WPXZBP »

With the old Tait T-2020s operating on VHF mid band there was no access to Em Ch A&B. The new Tait TM-8260s VFRS Brigades have that access plus access to the rest of the UHF channels. That means we can chat more easily with SES, WAPOL etc. And yes, VMRS now can do beach searches with non-VMRS boats etc.
Last edited by WPXZBP on Sun Nov 09, 2008 9:09 pm, edited 1 time in total.
Top
Fastlane
WARSUG top poster
WARSUG top poster
Posts: 1658
Joined: Wed Jul 06, 2005 4:24 pm
Amateur callsign: VK6FLMZ

Post by Fastlane »

WPXZBP wrote:The change was made to improve interoperability - FESA appliances etc can link with things like boats using Marine radio. The option is there for SJA to come on board if they wish. Appliances now have access to Emergency channels A & B on UHF.
There was also a limit to the number of frequencies available on VHF Mid-Band. Was quite a bit of frequency reuse going on, which resulted in interference when the atmospheric conditions were right..
Top
Post Reply

Return to “DFES/DBCA”