Hi all;
Any one out there who can program a Motorolla GP339 CB Portable Radio with the 40 CB channels, and the other possible 200 channels as a scanning option for radio freqs????
Im missing a programming cable and software for it - so if anyone who can do it successfully, im sure there will be a reward as a thankyou... $$$
Cheers
G
GP339 CB Portable
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: GP339 CB Portable
Can't program it, but it sure looks like a nice radio, gkgkoutlis wrote:Hi all;
Any one out there who can program a Motorolla GP339 CB Portable Radio with the 40 CB channels,
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
I guess u already know that you have bought a commercial transceiver and not your basic handheld CB radio. I could be wrong mate but i think you may have no luck getting any help from anyone but a Motorola dealer. Give these guys a try if you wish to go down that path, I have had good dealings with them in the past.
O.C.P. Sales
30 The Boardwalk
Ascot WA 6104
Contact: Paul Grant
Phone: 9477 6063
http://www.omnific.com.au
O.C.P. Sales
30 The Boardwalk
Ascot WA 6104
Contact: Paul Grant
Phone: 9477 6063
http://www.omnific.com.au
Re: GP339 CB Portable
May I reccomend that you have a look on eBay for a programing cable. Ree software there are places online that you can download it from I believe.
Good luck
Good luck
[PRC] Perth Radio Club. 495
Re: GP339 CB Portable
PRC, cheers mate - I appreciate it heaps... Welcome on board tooPRC-495 wrote:May I reccomend that you have a look on eBay for a programing cable. Ree software there are places online that you can download it from I believe.
Good luck
G
Re: GP339 CB Portable
No worries mate, glad i could help you out
Ta for the welcome
Ta for the welcome
[PRC] Perth Radio Club. 495
-
- Posts: 7
- Joined: Sat Mar 29, 2008 10:29 am
- Location: Wanneroo
-
- Posts: 16
- Joined: Wed Apr 05, 2006 10:53 pm
- Location: Perth Palm Beach
- Contact:
Programming
G'day,
I use a NEE-358 manuf China by KYD compatible with Kenwood.
I have all the accessories the cloning software cable throat mic pers mic/spkr battery car charger spare battery antenna nifty earphone.and a few other bits and pieces The cloning software is simple to make but buying it is dirt cheap a db9 plug tyo a spkr/pwr 7.2 volt jack.
Inputting all frequencies and offsets rx and tx are a piece of cake .
the radio plus the accessories about 180 Aud.
Pat
I use a NEE-358 manuf China by KYD compatible with Kenwood.
I have all the accessories the cloning software cable throat mic pers mic/spkr battery car charger spare battery antenna nifty earphone.and a few other bits and pieces The cloning software is simple to make but buying it is dirt cheap a db9 plug tyo a spkr/pwr 7.2 volt jack.
Inputting all frequencies and offsets rx and tx are a piece of cake .
the radio plus the accessories about 180 Aud.
Pat
I'm an ex Serviceman Viet Vet Ret'd
Honour The Dead
Fight Like Hell For The Living
Honour The Dead
Fight Like Hell For The Living
-
- Posts: 1
- Joined: Sat Aug 02, 2008 2:35 pm
Re: GP339 CB Portable
gkoutlis wrote:Hi all;
Any one out there who can program a Motorolla GP339 CB Portable Radio with the 40 CB channels, and the other possible 200 channels as a scanning option for radio freqs????
Im missing a programming cable and software for it - so if anyone who can do it successfully, im sure there will be a reward as a thankyou... $$$
Cheers
G
hay mate i can do it for you..what mhz to mhz?
yes i can