Hi all can any one tell me the Freqs For the Quarry Trucks of Boral and Readymix and any others around Perth. Also the Concrete Trucks Too.
Thancks in Advance
P.S I already have BGC
BGC Sand 150.675
BGC Concrete 150.375
Trucking
Moderator: yorky
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: Trucking
Had a look through the ACMA database for Readymix. Lots of licenses but not much in Perth. All I could find was a simplex listing of 474.850Mhz for the Gnangara Rd plant. They might use trunking.747400sp wrote:Hi all can any one tell me the Freqs For the Quarry Trucks of Boral and Readymix and any others around Perth. Also the Concrete Trucks Too.
Thancks in Advance
P.S I already have BGC
BGC Sand 150.675
BGC Concrete 150.375
Try 467.450Mhz and 466.750Mhz for Boral.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
It's MPT trunking. The whole conversation occupies one channel and you hear both sides of the conversation. (so it's simple to listen to) But without tracking the data channel it's impossible to know who has the channel at that time.747400sp wrote:Thanks Guys what about the old Pioneer and how do I moniter the Trunking channels of 416 - 418 they dont seem to be trackable with the trunk tracking scanner?
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr