WA SES

Frequently asked questions.

Got a question? This is the best place to check first!
Post Reply
Samysnake
Posts: 8
Joined: Sun Dec 14, 2014 10:15 pm
Scanners and Receivers: UBCD396XT, BC75XLT, PRO-25, TK-3170, TK-7180, GP339, SRM9000
Location: Waikiki

WA SES

Post by Samysnake » Thu Feb 12, 2015 7:18 pm

Hi guys

First post for me

Just wondering if anyone can tell me if the SES freqs in the link below are still valid?
Also, does anybody know the CTCSS tones?

http://warsug.info/warsug/frequencies/W ... 20v1-0.pdf


I have an SRM9000 and I want to build up a bit of a codeplug for it.

Thanks in advanced for your help :)

bogged
Moderator
Moderator
Posts: 39
Joined: Fri Jun 28, 2013 7:11 pm
Scanners and Receivers: Uniden UBC73XLT
Uniden UBCD396XT

Re: WA SES

Post by bogged » Thu Feb 12, 2015 9:16 pm

@sammysnake
yes they are still valid you can put the frequencies into your srm9000 as rx an leave tx blank it will still recieve without ctcss tones (someone can correct me if im wrong)

Samysnake
Posts: 8
Joined: Sun Dec 14, 2014 10:15 pm
Scanners and Receivers: UBCD396XT, BC75XLT, PRO-25, TK-3170, TK-7180, GP339, SRM9000
Location: Waikiki

Re: WA SES

Post by Samysnake » Thu Feb 12, 2015 9:51 pm

Thanks for that mate. I put them all in a scan group with TX inhibit so hopefully it's all good.

Thanks again :)
________________________
WASES Rockingham-Kwinana

matth2004
Posts: 100
Joined: Thu Dec 27, 2012 5:05 pm
Amateur callsign: VK6MAH
Contact:

Re: WA SES

Post by matth2004 » Fri Feb 13, 2015 1:36 pm

Yep no CTCSS required for listening. Shouldn't be any pirates on those freqs transmitting without a tone.
Matt
VK6MAH

Samysnake
Posts: 8
Joined: Sun Dec 14, 2014 10:15 pm
Scanners and Receivers: UBCD396XT, BC75XLT, PRO-25, TK-3170, TK-7180, GP339, SRM9000
Location: Waikiki

Re: WA SES

Post by Samysnake » Wed Mar 04, 2015 3:49 pm

So I've popped all those freqs in to a scan group on the SRM9000 and so far I haven't heard anything?

In saying that I am a FIFO worker and only flick the radio on on my r&r when I'm out in my 4wd.
________________________
WASES Rockingham-Kwinana

yorky
Moderator
Moderator
Posts: 2614
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Re: WA SES

Post by yorky » Wed Mar 04, 2015 5:18 pm

I don't think much happens if there are no storms and such around other than training so it would be pretty quiet.
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator

Raptor
Posts: 31
Joined: Mon Oct 21, 2013 7:45 am

Re: WA SES

Post by Raptor » Wed Mar 04, 2015 8:24 pm

matth2004 wrote:Yep no CTCSS required for listening. Shouldn't be any pirates on those freqs transmitting without a tone.
Pirates are not usually the problem when monitoring. it's other licenced users along with harminics and the noise floor which make receiving near impossible at times.

matth2004
Posts: 100
Joined: Thu Dec 27, 2012 5:05 pm
Amateur callsign: VK6MAH
Contact:

Re: WA SES

Post by matth2004 » Wed Mar 04, 2015 11:57 pm

Ah roger.

Try listening at night maybe between 1930-2130 as that's when most units are out training.
Matt
VK6MAH

Post Reply