Hi All
I’m New to this group. I purchased an ic400pro about 12 months ago and have since been told that I can get a program cable and software off the web, this I believe this will allow me to upgrade it from 5 watts to 25 watts. So I’m looking for helping this area. Where can I download the software from? (free if possible) and where is the best place to get the cable? And does if come with instructions? I live in Ocean Reef
Shane4070
Software for a IC-400pro
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: Software for a IC-400pro
Hi Shane.shane4070 wrote: I’m New to this group. I purchased an ic400pro about 12 months ago and have since been told that I can get a program cable and software off the web, this I believe this will allow me to upgrade it from 5 watts to 25 watts.
You're probably aware that changing your Icom from 5W to 25W on UHF CB is against the CB Radio Class License (so its illegal)
These folks here might be able to help you with cable/software etc:
http://groups.yahoo.com/group/ic400pro
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Posts: 16
- Joined: Wed Apr 05, 2006 10:53 pm
- Location: Perth Palm Beach
- Contact:
Cables Software Icom ic400
Well the software is $80.00 the cable is a USB std cable and as far as boosting it to 25Watts well if you don't want to give to the Radio Licensing Authority I would keep it at 5 watts I have Quansheng UHF 400-480
and I can talk from Palm Beach to joondalup and around the world using the PMR Gateway.
My Scanner is an IcR20 from 0.1 to 3.5 gHz
Pat
and I can talk from Palm Beach to joondalup and around the world using the PMR Gateway.
My Scanner is an IcR20 from 0.1 to 3.5 gHz
Pat
I'm an ex Serviceman Viet Vet Ret'd
Honour The Dead
Fight Like Hell For The Living
Honour The Dead
Fight Like Hell For The Living
-
- Posts: 2
- Joined: Mon Jun 13, 2011 6:38 am
Re: Software for a IC-400pro
the best place it buy the lead off ebay and have copy of the sofeware email we can go from there