Studio to OB van link
481.250Mhz
(114.8Hz CTCSS)
Channel 9 studio foldback freq
Moderator: yorky
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Channel 9 studio foldback freq
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Banned
- Posts: 485
- Joined: Mon Jul 24, 2006 4:37 pm
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Ahhh. I'm obviously close enough to the studio to hear the repeater uplink. 486.450 is the repeater output on the Bankwest tower:Steve wrote:Stronger signal on 486.450 (5.2 Mhz up)
http://web.acma.gov.au/pls/radcom/licen ... _NO=286531
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr