Best way to get rid of birdies
Moderator: yorky
Best way to get rid of birdies
Very strong interference when in scan mode it stops oh 469.1625 with just static
-
- Moderator
- Posts: 2993
- Joined: Sat Feb 09, 2008 10:06 am
- Amateur callsign: VK6UFO_VK6RN
- Scanners and Receivers:
Scanners/receivers
Diamond Welz WS1000 wideband handheld
Radioshack Pro 28 handheld
Uniden UBC72XLT handheld
Uniden UBC73XLT handheld
Uniden UBC330CRS desktop
Two-way
Yaesu VX-3R 2m/70cm Ham TRX and wideband RX handheld
Yaesu FT-1802M 2m Ham TRX mobile x 2
Yaesu FT-7800R 2m/70cm Ham TRX and wide band RX mobile
Icom IC-208H 2m/70cm Ham TRX and wide band RX mobile
Icom IC-706MKIIG all-band all-mode Ham TRX mobile
Icom IC-V85 2m VHF Ham TRX handheld
Wouxun KG-UVD1P VHF/UHF wideband Ham TRX handheld
Wouxun KG-679P VHF wideband Ham TRX handheld
Wouxun KG-713 UHF wideband Ham TRX handheld - Location: Just on the border of your waking mind
Re: Best way to get rid of birdies
Some scanners let you program in frequencies to skip when doing a search. Have a look at the manual.
Rob
OF78WD
Amateur moderator
.
→Arguing with a fool proves there are two
OF78WD
Amateur moderator
.
→Arguing with a fool proves there are two
-
- Posts: 75
- Joined: Thu Oct 04, 2007 8:25 am
- Location: Right here
Re: Best way to get rid of birdies
The first trick is to establish that it is a birdie and not local interference or harmonic or mixing.Diceman wrote:Very strong interference when in scan mode it stops oh 469.1625 with just static
If you remove the aerial and the noise is still present, then it is an internally generated signal or birdie. If the noise disappears then it is more than likely an externally generated signal, assuming that it is not a strong signal being generated by a computer or in some case digital TV or the like.
If it is a birdie and depending on the scanner you maybe able to lock it out. Otherwise it is going to be annoying. If it is a locally generated signal then moving the scanner within its environment (the shack) may help. An externally generated signal may take a bit more effort such as directional antenna, relocation of the antenna or filtering.
If it is a harmonic, then there is little that can be done, unless you can alter the IF stages of the scanner. Some can, most cannot. Again not knowing the radio involved makes it difficult to know. Mixing is a third product of two separate signal coming together to form a third. Usually a garble of voices and or data or both. Again not much that can be done, short of experimenting with aerial placement.
It is going to be an interesting exercise in RF behaviour.
R