APRS - part two

Post by **Tyranus** » Sat Aug 28, 2010 12:36 am

Lucky he wasn't in Midland...

VK6LD · Post by **VK6LD** » Sat Aug 28, 2010 1:05 pm

vk6hgr wrote:
VK6ADF wrote: There is little interest in APRS at the moment in Bunbury. There is a digipeater in Bunbury but it does not communicate with the network. I can digipeat to VK6KSB if I do it manually but it does not resend APRS traffic.
It might be a case of "build the network and the users will come". VK6RVP and my Igate opperated for years without a single user... but when interest started warming up a functioning digipeater and Igate was all ready to go.

I have just ordered another couple of loads of APRS equipment on behalf of local hams from Argent Data in the US.

Post by **robbage** » Sat Aug 28, 2010 5:41 pm

VK6LD wrote:I have just ordered another couple of loads of APRS equipment on behalf of local hams from Argent Data in the US.

A small truckload by the looks

We'll be ordering some more stuff from Argent Data in a few weeks if anybody's looking for Opentracker related items (or GPS suitable for APRS)

Post by **robbage** » Mon Sep 06, 2010 5:51 pm

A lot of flood symbols around VK3 at the moment

Post by **robbage** » Sun Sep 12, 2010 2:43 pm

Will the real VK6GHZ please stand up

Blinky · Post by **Blinky** » Sat Sep 18, 2010 4:43 pm

Looks like Geraldton now has its dedicated APRS digipeater on air now. =D>

Post by **robbage** » Wed Sep 22, 2010 6:09 pm

I'm ordering some more APRS stuff from Argent Data very soon if anybody in the Perth area wants to share the freight.
PM me ↓

Post by **robbage** » Fri Sep 24, 2010 6:09 am

Lotsa APRS DX last night. XLR Geraldton making it directly to KSB-3 Pinjarra. Both making it to me direct.
And I just pinged Cataby and Busselton repeaters.

vk6xlr · Post by **vk6xlr** » Fri Sep 24, 2010 11:43 am

Blinky wrote:Looks like Geraldton now has its dedicated APRS digipeater on air now. =D>

Hi guys

The digipeater is not quite ready to go upon the hill yet. Still being tested at my QTH but I've entered the co-ords for Moresby Range.

My FTM-350R in the shack heard VK6KSB-3, VK6RAA-3, VK6RAW-3, VK6AHR-3, VK6HGR-1, VK6AN-9, VK6MT, VK6WB-3, VK6RTH-3, VK6RVP-1 and VK6USB-3 via last nights tropo.

73,
Rick

Post by **robbage** » Fri Sep 24, 2010 4:44 pm

G'day Rick, welcome aboard.
Last summer we saw a VK3 which I seem to remember made it WIDE2-2 through a digi in Mt Gambier to VK6KSB-3.
Looks like we're getting a nice digipeater run going from your end down to Albany. One around Cataby and another around Williams or Wagin would fill the gaps nicely.

Post by **VK6ZMS** » Fri Sep 24, 2010 5:06 pm

A digi at the WARG site on Mt Saddleback would do the job nicely .

Post by **Zebedee** » Fri Sep 24, 2010 5:07 pm

Welcome to WARSUG, Rick, glad to have you aboard!

Post by **VK6ZMS** » Sat Sep 25, 2010 8:50 pm

More ducting tonight 20:34WST

VK6AN-9 mobile Brentwood to VK6AHR-3 Lesmurdie to VK6KSB-3 Pinjarra, I-gated in Geraldton VK6XLR

Post by **robbage** » Mon Oct 04, 2010 5:44 pm

I've not noticed this function before at aprs.fi It shows you a general map of where digipeaters and i-gates are hearing other stations. This one's for Tic Hill and shows just how well the digi works.
http://aprs.fi/heard/a/VK6RTH-3

Post by **VK6ZMS** » Mon Oct 04, 2010 5:47 pm

That is neat

How did you find that ?

WA Radio Scanner Users' Group

APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two

Re: APRS - part two