Anyone know any good Security service Frequencies?

General questions on scanning from 30 to 3000Mhz. Not sure what you can receive in your area? Here's the place to ask!

Moderator: yorky

Post Reply
slipknot
150+ posts
150+ posts
Posts: 662
Joined: Thu Dec 07, 2006 7:04 pm
Scanners and Receivers: Yaesu FT-857 Yaesu FT7800 Icom ID800H
Location: Perth
Contact:

Anyone know any good Security service Frequencies?

Post by slipknot »

Hi everyone, Merry Christmas.
Just wondering if anyone knew any good security freqencies, eg. council patrols, security companies such as iss, ect.
yorky
Moderator
Moderator
Posts: 2630
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Re: Anyone know any good Security service Frequencies?

Post by yorky »

Well I'll start you off with Transperth Security on 489.400. Joondalup I don't really know, Stirling I think on a trunk? Wilsons also have a main channel I think 485.950 for there other security tasks.

Also rail on 418.775 / 418.300 / 418.125 depending on where you are as well.
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator
slipknot
150+ posts
150+ posts
Posts: 662
Joined: Thu Dec 07, 2006 7:04 pm
Scanners and Receivers: Yaesu FT-857 Yaesu FT7800 Icom ID800H
Location: Perth
Contact:

Re: Anyone know any good Security service Frequencies?

Post by slipknot »

yorky wrote:Well I'll start you off with Transperth Security on 489.400. Joondalup I don't really know, Stirling I think on a trunk? Wilsons also have a main channel I think 485.950 for there other security tasks.

Also rail on 418.775 / 418.300 / 418.125 depending on where you are as well.

Sweet..............., Thanks man!
richard omeara

Re: Anyone know any good Security service Frequencies?

Post by richard omeara »

Stirling Scty on 416.915,Waneroo Rangers on 416.6875.Both on MPT trunking system.So during the day there is others on frequancy.During night a bit better.Bayswater security on 162.925.But as with Stirling & Waneroo it is also used by that council(garbage trucks,road works ect)If you want Perth ,Town of Vincent ,Cambridge parking inspectors,rangers you will need a scanner with trunk tracking.Bit of interesting stuff on the trunking system.Ive noticed Ellenbrooke &Belmont also have there own security.Hope this helps.
yorky
Moderator
Moderator
Posts: 2630
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Re: Anyone know any good Security service Frequencies?

Post by yorky »

Ok just a follow up to Stirling Security.

Now obviously they run off a trunk, but during the night no they don't just run off 416.915/416.9125.

I was with a security officer as his radio was active, and mine wasn't (although when it got around to the most common channel is was alive at the same time as his).

Here is the list, from a previous post and cross checked with all the trunk channels from this comms company running from QV1:

415.625 MHz
415.6625 MHz
415.9125 MHz
415.925 MHz

416.0 MHz
416.0375 MHz
416.125 MHz
416.1625 Mhz
416.4125 MHz
416.425 MHz
416.5 MHz
416.5375 MHz
416.625 MHz
416.6625 Mhz
416.915 (actual: 416.9125) Mhz
416.925 MHz

417.0 MHz
417.0375 MHz
417.1625 MHz
417.4125 MHz
417.425 MHz
417.5 MHz
417.5375 MHz
417.925 MHz

418.0375 MHz

I've sorted it as best I can above, obviously there is going to be a lot of other people using this, but if anyone wants to test them out feel free to report back! Obviously keep in mind if you just use a simple scanner the conversations will bounce around the above.
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator
Post Reply