Page 1 of 1
City of Joondalup security
Posted: Tue May 19, 2009 4:13 pm
by richard omeara
Seen a car in Warwick yesterday with City of Joondalup security plastered all over it.Are they new or dont i get out enough? And what radios and frequency do the use?
Re: City of Joondalup security
Posted: Tue May 19, 2009 5:02 pm
by Fitzyyy
Found these on another topic in this forum
City of Joondalup:470.5500
865.6875
866.6875
867.6875
868.6875
869.6875
looks like there on a trunked system. Hope this helps you out
Re: City of Joondalup security
Posted: Tue May 19, 2009 5:08 pm
by yorky
I see them very often, not sure how many they have but I'd say at least a handful that just patrol.
Re: City of Joondalup security
Posted: Tue May 19, 2009 5:57 pm
by richard omeara
Thanks Fitzyyy & Yorky.Ill see if i can find a TGID.
Re: City of Joondalup security
Posted: Tue May 19, 2009 6:25 pm
by yorky
If you get anything juicy let us know
Re: City of Joondalup security
Posted: Tue May 19, 2009 6:26 pm
by vk6hgr
Fitzyyy wrote:Found these on another topic in this forum
City of Joondalup:470.5500
865.6875
866.6875
867.6875
868.6875
869.6875
CoJ/CoW don't use that system anymore. They're now on a 400MHz MPT trunking system.
Re: City of Joondalup security
Posted: Wed May 20, 2009 7:17 am
by richard omeara
Im going to give it a go on TrunkView
Re: City of Joondalup security
Posted: Wed May 20, 2009 5:46 pm
by Comint
richard omeara wrote:Im going to give it a go on trunkview
I'm interested as to what SysID is used on that system.
--
Comint
Re: City of Joondalup security
Posted: Wed May 20, 2009 6:12 pm
by richard omeara
Sorry new to this.Ive got trunkview on my laptop.Got the UBCD996T hooked up.Im not geting very good conection between audio out and laptop.Im geting heaps of data but no voice com.Ill keep trying and let you know.Im getting data that says system id 0049 and system id 3089.If thats any help.Also says Go to Channel-Voice Ch 50 Freq 0.0000mhz
Re: City of Joondalup security
Posted: Wed May 20, 2009 9:23 pm
by Comint
richard omeara wrote:Sorry new to this.Ive got trunkview on my laptop.Got the UBCD996T hooked up.Im not geting very good conection between audio out and laptop.Im geting heaps of data but no voice com.Ill keep trying and let you know.Im getting data that says system id 0049 and system id 3089.If thats any help.Also says Go to Channel-Voice Ch 50 Freq 0.0000mhz
Sounds like you have not set up the Base Frequency or Step yet.
My guess is that the Base Frequency is 415.5625 MHz, Step 12.5 kHz
Once that is correctly set-up, the above GoTo should show a frequency of 416.1875 MHz.
The ACMA Database lists the following frequencies for the City of Wanneroo:
415.6875, 416.1875, 416.6875, 417.1875, 417.6875
415.9375, 416.4375, 416.9375, 417.4375,
The Biscom Site on QV1 building has a SysID of 0049, so I suspect 3089 is the City of Joondalup/City of Wanneroo system.
--
Comint
Re: City of Joondalup security
Posted: Thu May 21, 2009 8:04 am
by richard omeara
Is the base freq and step set up on the scanner or the TrunkView program?OK ive set the step on scanner to 12.5 and will set base station and have a play tonight.Thanks
Re: City of Joondalup security
Posted: Thu May 21, 2009 10:18 am
by Comint
richard omeara wrote:Is the base freq and step set up on the scanner or the TrunkView program?OK ive set the step on scanner to 12.5 and will set base station and have a play tonight.Thanks
The Base Frequency and Step need to be set up in TrunkView for each Site
Click on Options -> Sites Database, and fill in the fields at the bottom.
The Control Channel is the frequency you are receiving the data stream on.
The City of Wannaroo has two Sites, the first row of frequencies, above, are at Wannaroo, and the second row are at Yanchep, and the Sites
should have different SysIDs, but both starting with the same digit.
--
Comint