Page 1 of 1
finitialising scanner
Posted: Thu Jun 05, 2008 4:30 pm
by Warnbro
Could someone please advise this greenhorn, re initialising my scanner and putting in fesa frequencies. Do I need to set frequency limits everytime I initialise the scanner. I currently have police frequencies in there also couple of railway frequencies, which are not active enough,someone suggested the fesa frequencies are very active so was thinking I would just wipe what I've got in there and start again with the Fesa ones. Any suggestions please guys.
Posted: Thu Jun 05, 2008 5:42 pm
by yorky
Sorry, greenhorn?
Posted: Thu Jun 05, 2008 5:52 pm
by Toottoot
Greenhorn = newb
Posted: Thu Jun 05, 2008 5:55 pm
by yorky
Toottoot wrote:Greenhorn = newb
I see.
What scanner do you actually have?
re what type of scanner
Posted: Thu Jun 05, 2008 6:00 pm
by Warnbro
Ive got a Realistic 200ch hyperscan Pro2039, have initialised it and put in some of the fesa frequencies but not getting anything out of it, no transmissions. Is there anyone in the Rockingham area that could reprogram it for a small fee. I'm not really sure I'm doing it right.
Posted: Thu Jun 05, 2008 9:22 pm
by playworth
well police is outta everyone hand. not even media ppl can listen
rocko hey mm. probly listen to maccas /KFC drive thur and fishie dept.
and taxis. plus sja.and and and bus channel that full of entaintment.
Posted: Thu Jun 05, 2008 11:43 pm
by donks
also if someone could help me.. hahaha... i have a UBC72xlt and i never really worked out how to use it correctly in the way that when i manually input a frequency (469.000 for example) it comes up with 'ERROR' on screen... can someone inform me how to listen to channels i put in manually?????
cheers
Posted: Thu Jun 05, 2008 11:47 pm
by Tyranus
Donks I have a 93XLT which is the next model up. Let me know when you're free and where you can get to and I'll bring mine and show you how to program it and you can also grab some of the frequencies.
Cheers,
Posted: Thu Jun 05, 2008 11:55 pm
by donks
Tyranus wrote:Donks I have a 93XLT which is the next model up. Let me know when you're free and where you can get to and I'll bring mine and show you how to program it and you can also grab some of the frequencies.
Cheers,
Thanks a lot matey.. appreciate your offer of help! I shall work out when I have some free time and PM you.!
cheers!
Posted: Fri Jun 06, 2008 8:07 am
by yorky
Also with my 93, actually no, my 92, you go to the channel, and press function then E (or the pgm [program]) button. Type in freq and press E again.
From memory the 72 is the same as the 92 with 100 channels instead of 200. To exit program mode just hit hold or scan, pressing E again stays in program mode and moves to the next channel.
Posted: Fri Jun 06, 2008 3:57 pm
by spartacus
Posted: Fri Jun 06, 2008 4:02 pm
by yorky
5) press hold to enter
Err isn't it press E again to enter like I said above?
Posted: Fri Jun 06, 2008 4:24 pm
by spartacus
yorky wrote:
5) press hold to enter
Err isn't it press E again to enter like I said above?
i stand corrected
Posted: Fri Jun 06, 2008 4:28 pm
by yorky
No worries I was thinking to myself shite I gave the wrong info but I just tried it
