Trucking

General questions on scanning from 30 to 3000Mhz. Not sure what you can receive in your area? Here's the place to ask!

Moderator: yorky

Post Reply
747400sp
Posts: 45
Joined: Wed Oct 26, 2005 8:31 pm

Trucking

Post by 747400sp »

Hi all can any one tell me the Freqs For the Quarry Trucks of Boral and Readymix and any others around Perth. Also the Concrete Trucks Too.
Thancks in Advance
P.S I already have BGC
BGC Sand 150.675
BGC Concrete 150.375
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:

Re: Trucking

Post by vk6hgr »

747400sp wrote:Hi all can any one tell me the Freqs For the Quarry Trucks of Boral and Readymix and any others around Perth. Also the Concrete Trucks Too.
Thancks in Advance
P.S I already have BGC
BGC Sand 150.675
BGC Concrete 150.375
Had a look through the ACMA database for Readymix. Lots of licenses but not much in Perth. All I could find was a simplex listing of 474.850Mhz for the Gnangara Rd plant. They might use trunking.

Try 467.450Mhz and 466.750Mhz for Boral.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
Always RX
Moderator
Moderator
Posts: 773
Joined: Tue Sep 27, 2005 8:04 pm
Location: 2.5 DME PH

Post by Always RX »

Yep...they use trunking..in the 416-418 mhz range.
747400sp
Posts: 45
Joined: Wed Oct 26, 2005 8:31 pm

Post by 747400sp »

Thanks Guys what about the old Pioneer and how do I moniter the Trunking channels of 416 - 418 they dont seem to be trackable with the trunk tracking scanner?
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:

Post by vk6hgr »

747400sp wrote:Thanks Guys what about the old Pioneer and how do I moniter the Trunking channels of 416 - 418 they dont seem to be trackable with the trunk tracking scanner?
It's MPT trunking. The whole conversation occupies one channel and you hear both sides of the conversation. (so it's simple to listen to) But without tracking the data channel it's impossible to know who has the channel at that time.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
747400sp
Posts: 45
Joined: Wed Oct 26, 2005 8:31 pm

Post by 747400sp »

Is there any software to help track the users?
747400sp
Posts: 45
Joined: Wed Oct 26, 2005 8:31 pm

Post by 747400sp »

Gavin try 465.125Mhz it could be Boral take a listen let me know what you think.
Cheers Mark.
747400sp
Posts: 45
Joined: Wed Oct 26, 2005 8:31 pm

Post by 747400sp »

Gavin also 465.450Mhz.
Post Reply