Perth Arena
Posted: Thu Mar 12, 2015 11:15 am
Hi all. Does anyone know what frequencies Perth Arena uses?
Providing a voice for responsible scanner users in Western Australia
https://warsug.info/
Thanks mate.Raptor wrote:Roland, the system is Motorola Capacity Plus running 5 TX/RX freq pairs. As the system is Mototrbo you will need to use equipment that can receive DMR.
FYI, The repeater "booms" out and can be heard quite a distance from the stadium.
Portable RID's start with 61XXX and base/fixed units are 56XX
Talkgroup range is 20-32(12 known in use)
FYI, there is no DMR conventional scanner on the market, you can use a cheap dongle or save for a good commercial interface. they all do just as good as each other for most monitoring. There are other methods but a dongle will be the cheapest.roland985 wrote:
Thanks mate.
A DMR and P25 scanner is on my purchase list.
This information will be brilliant for the future.
Warsug is always open for generous donations! hehe.roland985 wrote:I'm going to get a lot of surplus gear that can support it.
I'll find a link to an article/how to. There is plenty of DMR and P25 around that is in the clear.vk6hgr wrote:Warsug is always open for generous donations! hehe.roland985 wrote:I'm going to get a lot of surplus gear that can support it.
I haven't played much with decoding P25 and DMR with dongles... Are any folks who have done this interested in writing a how-to?
FYI there are now scanners that will do DMR & NXDN i use the new whistler TRX-2 and AOR AR-DV1 both work ok.Raptor wrote:FYI, there is no DMR conventional scanner on the market, you can use a cheap dongle or save for a good commercial interface. they all do just as good as each other for most monitoring. There are other methods but a dongle will be the cheapest.roland985 wrote:
Thanks mate.
A DMR and P25 scanner is on my purchase list.
This information will be brilliant for the future.
I just turned on my receiver and they are on air now using 2 talkgroups so far
How do you set up the Perth Arena frequency? Im using the Uniden 436hp with dmr upgrade.Ive tried puting the previously posted frequencies into a Mototurbo system but nothing comes up.radioman061 wrote:Raptor wrote:roland985 wrote:
FYI there are now scanners that will do DMR & NXDN i use the new whistler TRX-2 and AOR AR-DV1 both work ok.