Help with Uniden UBC126AT Please

General questions on scanning from 30 to 3000Mhz. Not sure what you can receive in your area? Here's the place to ask!

Moderator: yorky

Post Reply
andrewmsr
Posts: 3
Joined: Thu Jan 01, 2015 3:01 pm
Scanners and Receivers: hoping to buy?

Help with Uniden UBC126AT Please

Post by andrewmsr »

Hi All,
I have just purchased a Uniden UBC126AT, I have read through the booklet that came with it but I cant get passed the first screen. When I turn the unit on it goes through the copyright info then comes to what I think is the start screen.

The display reads

Scan Mode
All locked!

bnk: 23 567890

I cant see anything in the book that relates to "locks" other than the keypad lock

any help please
Thanks Andrew
Thanks Andrew

The only person to get everything done by Friday was Robinson Crusoe.
yorky
Moderator
Moderator
Posts: 2630
Joined: Tue Sep 13, 2005 7:46 pm
Location: Perth

Re: Help with Uniden UBC126AT Please

Post by yorky »

Sounds like there is just nothing to scan to start with?

Are you able to manually enter frequencies as per the manual? You could also give Uniden a call on 1300 366 895.
"VKI, NJ050 will you be attending the job?"
"Negative VKI, my desk is bolted to the floor".
WARSUG General Scanning Moderator
rustynswrail
Posts: 75
Joined: Thu Oct 04, 2007 8:25 am
Location: Right here

Re: Help with Uniden UBC126AT Please

Post by rustynswrail »

andrewmsr wrote:Hi All,
I have just purchased a Uniden UBC126AT, I have read through the booklet that came with it but I cant get passed the first screen. When I turn the unit on it goes through the copyright info then comes to what I think is the start screen.
The display reads
Scan Mode
All locked!
bnk: 23 567890
I cant see anything in the book that relates to "locks" other than the keypad lock
any help please
Thanks Andrew
With the radio turned off, press and hold the 2, 9 and HOLD buttons all at the same time, while turning the radio on. It will reset it back to factory default and undo any errors. You will loose any data that has been entered.

R
andrewmsr
Posts: 3
Joined: Thu Jan 01, 2015 3:01 pm
Scanners and Receivers: hoping to buy?

Re: Help with Uniden UBC126AT Please

Post by andrewmsr »

Thanks Rustynswrail,

I have tried your suggested fix with no luck.
I haven't been able to enter anything as every time i to anything it comes up with the message ALL LOCKED!!
Thanks Andrew

The only person to get everything done by Friday was Robinson Crusoe.
elvistcb62
Posts: 3
Joined: Thu Feb 19, 2015 9:23 pm

Re: Help with Uniden UBC126AT Please

Post by elvistcb62 »

Is this scanner new?
elvistcb62
Posts: 3
Joined: Thu Feb 19, 2015 9:23 pm

Re: Help with Uniden UBC126AT Please

Post by elvistcb62 »

But if ever thing is still locked after a factory reset the unit has a bad possessing chip or a bad bord
andrewmsr
Posts: 3
Joined: Thu Jan 01, 2015 3:01 pm
Scanners and Receivers: hoping to buy?

Re: Help with Uniden UBC126AT Please

Post by andrewmsr »

Yes it is new and i am not real happy with uniden i sent them an email back in January and i am still waiting for them to get back to me.
i know i should of followed up with them but have been busy.
Thanks Andrew

The only person to get everything done by Friday was Robinson Crusoe.
juttt45
Posts: 1
Joined: Tue Mar 31, 2015 8:49 pm

Re: Help with Uniden UBC126AT Please

Post by juttt45 »

HOLD buttons all at the same time, while turning the radio on. It will reset it back to factory default and undo any errors. You will loose any data that has been entered.???
Post Reply