Hi All.
A frequency to watch out for with the RAC - 470.875Mhz.
Unlike the other RAC frequencies which carry both voice and data (which make them a pain to listen to), this one is just voice.
I'm thinking it's the battery mob but not sure... feel free to post here what you hear
RAC
Moderator: yorky
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
RAC
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Why not? Sounds interestingdazla wrote:Why do you listen to the RAC?
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
No idea...dazla wrote:What do you hear on their channels, not being sarcastic I just never thought that people would listen or what they would hear?
I've got it on the scan group I listen to now, see if I can hear anything interesting.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Most jobs go through the data channels but they still use that frequency for enquiries.radiohead wrote:Hey Gav
Have you got any more info on RAC freq's since you posted this?
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
I did have some RAC frequencies. I got them out of a scanner book but they were listed as being western power.....I have no idea why.
Sometimes you will hear the patrol man asking the radio operator to make a note on the job for whatever reason.
I also know an RAC man and Ive heard him on the radio once or twice.
Sometimes you will hear the patrol man asking the radio operator to make a note on the job for whatever reason.
I also know an RAC man and Ive heard him on the radio once or twice.