New VHF channels
Moderator: bogged
-
vk6hgr
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: New VHF channels
164.6125MHz Wanneroo now linked to 6AR.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
kyeboi
- 150+ posts
- Posts: 340
- Joined: Sat Nov 06, 2010 4:55 pm
- Scanners and Receivers: UNIDEN UBC355XLT
Re: New VHF channels
does anyone scanners pick up wanneroo and two rocks high band ? my scanner seams to step them two freq!
KyeBoi
Yanchep VFRS
Yanchep VFRS
-
robbage
- Moderator
- Posts: 2993
- Joined: Sat Feb 09, 2008 10:06 am
- Amateur callsign: VK6UFO_VK6RN
- Scanners and Receivers:
Scanners/receivers
Diamond Welz WS1000 wideband handheld
Radioshack Pro 28 handheld
Uniden UBC72XLT handheld
Uniden UBC73XLT handheld
Uniden UBC330CRS desktop
Two-way
Yaesu VX-3R 2m/70cm Ham TRX and wideband RX handheld
Yaesu FT-1802M 2m Ham TRX mobile x 2
Yaesu FT-7800R 2m/70cm Ham TRX and wide band RX mobile
Icom IC-208H 2m/70cm Ham TRX and wide band RX mobile
Icom IC-706MKIIG all-band all-mode Ham TRX mobile
Icom IC-V85 2m VHF Ham TRX handheld
Wouxun KG-UVD1P VHF/UHF wideband Ham TRX handheld
Wouxun KG-679P VHF wideband Ham TRX handheld
Wouxun KG-713 UHF wideband Ham TRX handheld - Location: Just on the border of your waking mind
Re: New VHF channels
If your scanner allows 12.5 kHz steps then select that and try again, otherwise you might be out of luck
Rob
OF78WD
Amateur moderator
.
→Arguing with a fool proves there are two
OF78WD
Amateur moderator
.
→Arguing with a fool proves there are two
-
kyeboi
- 150+ posts
- Posts: 340
- Joined: Sat Nov 06, 2010 4:55 pm
- Scanners and Receivers: UNIDEN UBC355XLT
Re: New VHF channels
ill get the manual out and have a look cheers dude
update- all good my scanner was set of fire and those freq weren't in those channels, i changed to band and found them stoked =)
update- all good my scanner was set of fire and those freq weren't in those channels, i changed to band and found them stoked =)
KyeBoi
Yanchep VFRS
Yanchep VFRS
-
arrived66
- Posts: 8
- Joined: Thu Aug 02, 2012 8:43 pm
- Scanners and Receivers: Vehicle installed UBC73XLT
Re: New VHF channels
Hi folks. First post...
It appears WAERN Channel 141 (Canning Mills - 164.0000) has gone silent. Not surprising, as I haven't seen it on any of the metro comms plans. WAERN Channel 371 is the current 6AR channel for that area and can be accessed on 163.6750Mhz.
Cheers
It appears WAERN Channel 141 (Canning Mills - 164.0000) has gone silent. Not surprising, as I haven't seen it on any of the metro comms plans. WAERN Channel 371 is the current 6AR channel for that area and can be accessed on 163.6750Mhz.
Cheers
-
vk6hgr
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: New VHF channels
The SES Comms support van repeater is channel 306 - 163.250MHz.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
Re: New VHF channels
Yes 306 was operational however 238 was still heavily used. We also setup 83 mid band.
Matt
VK6MAH
VK6MAH