Page 1 of 1
Programing GP328's
Posted: Wed Jan 02, 2008 10:37 pm
by Penthrox
Hi I am after some help in acquiring the software to program these radios. Now it is my understanding that there are 2 ways to do this. One being through Motorola and the other being third party software. If anyone could please help me clarify what I would need to do or how to obtain this software please let me know
Thanks in advance.
Posted: Wed Jan 02, 2008 11:02 pm
by celestial_insight
I've just put this up for you to download. I hope it works for you.
http://thepiratebay.org/tor/3958134
Posted: Thu Jan 03, 2008 6:25 am
by celestial_insight
And for a whole bunch of RSS to program your radios, you can download this :
http://thepiratebay.org/tor/3958748
Posted: Thu Jan 03, 2008 10:43 am
by vk6hgr
No seeds
Posted: Thu Jan 03, 2008 7:30 pm
by celestial_insight
Sorry - family member turned off the PC today!!!! I can see you are downloading though Gav - your IP is a dead giveaway!
Posted: Sat Mar 29, 2008 10:59 am
by Matt the sparky
I can program gp 328 radios. I have a few of the 16 channel radios setup for the bike with a throat mic and ear piece with the PTT button on the handle bar next to the horn button.
Posted: Sat Mar 29, 2008 11:58 am
by playworth
Matt the sparky wrote:I can program gp 328 radios. I have a few of the 16 channel radios setup for the bike with a throat mic and ear piece with the PTT button on the handle bar next to the horn button.
intersting....
i know someone (teachers ppl how ride bikes) that be intersting in that.
Posted: Sat Mar 29, 2008 1:39 pm
by Craig
Matt the sparky wrote:I can program gp 328 radios. I have a few of the 16 channel radios setup for the bike with a throat mic and ear piece with the PTT button on the handle bar next to the horn button.
Can I ask where you got the throat mic? I bought one off ebay a while ago, but it was poor quality and my voice comes out all muffled. Regular mic's are no good once I get over 50km/h.
Posted: Mon Mar 31, 2008 4:57 pm
by Matt the sparky
I got the mic setup from china. I replaced the mic insert with one from jaycar as i had the same problem with the sound on transmit.
to celestial_insight
Posted: Tue Apr 15, 2008 5:23 pm
by malamute
what icom software have you got please ? You can message me if you want to
Posted: Sun May 18, 2008 12:11 am
by Matt the sparky
GP 328 radios are made by MOTOROLA! Not ICOM.
Posted: Mon May 19, 2008 3:51 pm
by Lucas_arts_182
Matt the sparky wrote:I got the mic setup from china. I replaced the mic insert with one from jaycar as i had the same problem with the sound on transmit.
do you talk at natural volume?, ive been told of people yelling over the sound of wind or the motor when the mic doesnt pick that up and the transmission comes out extremely distorted.
And yes , Motorola GP328's are infact Motorolas....
Re: Programing GP328's
Posted: Sat Mar 14, 2009 7:37 am
by osram
Look for Motorola Professional Radio CPS R06.01.00 program.
I have a copy of a copy of a copy.
Re: Programing GP328's
Posted: Tue Mar 24, 2009 6:10 am
by radiotech
Re: Programing GP328's
Posted: Thu Dec 29, 2011 6:59 pm
by qihao12345
My GP328 frequency doesn't match with software programming... Any Idea ?? I just want to make the frequency lower a bit...
Regards.
