Any one out there who can program a Motorolla GP339 CB Portable Radio with the 40 CB channels, and the other possible 200 channels as a scanning option for radio freqs????
Im missing a programming cable and software for it - so if anyone who can do it successfully, im sure there will be a reward as a thankyou... $$$
I guess u already know that you have bought a commercial transceiver and not your basic handheld CB radio. I could be wrong mate but i think you may have no luck getting any help from anyone but a Motorola dealer. Give these guys a try if you wish to go down that path, I have had good dealings with them in the past.
O.C.P. Sales
30 The Boardwalk
Ascot WA 6104
Contact: Paul Grant
Phone: 9477 6063 http://www.omnific.com.au
PRC-495 wrote:May I reccomend that you have a look on eBay for a programing cable. Ree software there are places online that you can download it from I believe.
Good luck
PRC, cheers mate - I appreciate it heaps... Welcome on board too
I can program gp 339 radios. I have set my 339's with channel 1 to 40 plus 4 other private channels. Channels 1 to 8 have the repeater talkaround fonction button enabled which is the same as a duplex/simplex button.
G'day,
I use a NEE-358 manuf China by KYD compatible with Kenwood.
I have all the accessories the cloning software cable throat mic pers mic/spkr battery car charger spare battery antenna nifty earphone.and a few other bits and pieces The cloning software is simple to make but buying it is dirt cheap a db9 plug tyo a spkr/pwr 7.2 volt jack.
Inputting all frequencies and offsets rx and tx are a piece of cake .
the radio plus the accessories about 180 Aud.
Pat
Any one out there who can program a Motorolla GP339 CB Portable Radio with the 40 CB channels, and the other possible 200 channels as a scanning option for radio freqs????
Im missing a programming cable and software for it - so if anyone who can do it successfully, im sure there will be a reward as a thankyou... $$$
