Hi all,
Some of you may know I run the YPPH ATC Stream.
http://www.liveatc.net/feedindex.php?ty ... ational-oc
I've had to take down the YPPH ATC Stream for about a week.
Sorry for the inconveniance.
It'll be back up after 27th Nov hopefully
Cheers,
Carsten
YPPH ATC Feed
Moderators: Infernal, Nafenn, numloxx
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
Hi all,
Stream is back up now.
Hope nobody suffered withdrawal symptoms
Cheers,
Carsten
Stream is back up now.
Hope nobody suffered withdrawal symptoms
Cheers,
Carsten
-
- WARSUG top poster
- Posts: 941
- Joined: Sat Jul 14, 2007 1:15 pm
- Amateur callsign: ONEDAYILLGETIT
- Scanners and Receivers: ubc92xlt
- Location: BOO!!
Re: YPPH ATC Feed
"Unauthorized Laser" Reported, heard on ATIS
To stop displaying signatures, go to the User Control Panel > Board Preferences > Edit display options > Display signatures > No > Submit
Re: YPPH ATC Feed
It's also been noted in the Pilots Area Briefing;spartacus wrote:"Unauthorized Laser" Reported, heard on ATIS
ATIS YPPH Y 131203
APCH: EXPECT ILS APCH
RWY: 21 AND 24 FOR ARR.
RWY 21 FOR DEP
SFC COND: WET
+ OPR INFO: UNAUTHORISED LASER ILLUMINATION EVENT HAS BEEN
REPORTED AT 008 DEGREES 9 NM PERTH AT 2500 FEET
+ WIND: VRB
+ VIS: GREATER THAN 10 KM
WX: -VCSH
CLD: FEW015.SCT032
+ TMP: 12
QNH: 1016
George
WARSUG Moderator
VFRS Member
"I am not one who was born in the possession of knowledge. I am one who is fond of antiquity, and earnest in seeking it there." — Confucius
Any views expressed in the above post are my own and do not necessarily depict or reflect the views or opinions of DFES/FRS or VBFB.
WARSUG Moderator
VFRS Member
"I am not one who was born in the possession of knowledge. I am one who is fond of antiquity, and earnest in seeking it there." — Confucius
Any views expressed in the above post are my own and do not necessarily depict or reflect the views or opinions of DFES/FRS or VBFB.
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
YPPH LiveATC Stream... is back up. Sorry for the downtime, should be running stable now.
Thanks for your patience.
Cheers,
Carsten
Thanks for your patience.
Cheers,
Carsten
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
Apologies for the recent downtime of the stream. I've been having some issues with my ADSL router. I have switched to a backup router and hopefully it'll be more stable until I can get a replacement router. Thanks for your patience
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
For further updates to the new server build, see viewtopic.php?f=14&t=15511
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
She's still running, even after all this time.
Current setup is 4 x Raspberry PI's with 1 USB RTL-SDR dongle in each, connected to a 4 way splitter preamp, antenna is on the roof of a warehouse at Perth Airport.
Current setup is 4 x Raspberry PI's with 1 USB RTL-SDR dongle in each, connected to a 4 way splitter preamp, antenna is on the roof of a warehouse at Perth Airport.
-
- Site Admin
- Posts: 2610
- Joined: Thu Feb 24, 2005 10:33 pm
- Amateur callsign: VK6HGR
- Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
- Location: Perth, Western Australia
- Contact:
Re: YPPH ATC Feed
Nice. How's the equipment reliability?
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
Pretty good. Only have issues when the internet drops out. And if the pis have issues I have a wifi power switch that I can cycle to reboot them.
-
- Moderator
- Posts: 468
- Joined: Fri Feb 25, 2005 3:39 pm
- Amateur callsign: VK6PCB
- Location: Maylands, Perth, WA
- Contact:
Re: YPPH ATC Feed
I think it's this one.
https://www.bunnings.com.au/arlec-grid- ... t_p0135440
https://www.bunnings.com.au/arlec-grid- ... t_p0135440