New YPPH LiveATC build

Aircraft, traffic control, air services

Moderators: Infernal, Nafenn, numloxx

Post Reply
numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

New YPPH LiveATC build

Post by numloxx »

Hi all,

I'm in the planning stages of a new build for the YPPH feeder server.
Currently I have a single Raspi 3 running 2 x RTL-SDR dongles, each doing 2 feeds. Eg 4 feeds total. Antenna splits 2 ways, with a filter to allow only 117-137MHz into the dongles.

My plan is to have 4 raspis, each running a single stream.
Antenna will pass through a filter, then through a 4 way preamp splitter, then to 4 SDR dongles.
It will be a similar setup to this - https://makezine.com/projects/build-a-c ... i-cluster/
Image
With a 5v powered 5 port network switch, and a powered USB hub, so I will only need 2 x power packs. One for the USB hub, and a 2nd for the Amp.

I will also be changing the location for my feeder in the coming months, as the location where it is currently hosted, the tenant is moving out.

Any comments or suggestions would be appreciated, in case I have missed something before I go spend $s :D

JhG123
150+ posts
150+ posts
Posts: 205
Joined: Mon Oct 29, 2018 8:20 pm

Re: New YPPH LiveATC build

Post by JhG123 »

I'd suggest if you're just doing streaming, go for some Pi Zero's. They're cheaper and smaller so the stack would be more compact and in theory, require less power.

Edit: you could even try virtualisation on an old computer, but I don't know fully if that would work. Plus, the cluster would look cooler with all the Pi's :wink:
Unoffical WARSUG discord v2: https://discord.gg/eccmazE

numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

I did consider Pi Zeros,. but I would prefer ethernet on board rather than Wifi. More reliable, especially when having 4 in close proximity to each other. And no USB A connectors on board.. an extra adapter required.

Bonez
Moderator
Moderator
Posts: 807
Joined: Sun Nov 20, 2005 5:37 pm
Location: Perth, WA

Re: New YPPH LiveATC build

Post by Bonez »

Sounds like a really cool project numloxx, would be interested in seeing photos once the build is complete. I've never dived into the world of Pi's but I am seriously considering it after reading a few different things online recently.

I've got a HTPC that runs VMware Workstation with a couple of Linux VMs and an Asus router running Merlin, so I don't *need* a Pi for anything, but the geek in me wants to dive into it as a fun project.

numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

Should have some parts arriving tomorrow or Friday hopefully so I can start building :) Won't have the 4 way splitter preamp for a few weeks though, so we'll be without a LiveATC feeder for a while maybe.

JhG123
150+ posts
150+ posts
Posts: 205
Joined: Mon Oct 29, 2018 8:20 pm

Re: New YPPH LiveATC build

Post by JhG123 »

Which model Pi's did you go for?
Unoffical WARSUG discord v2: https://discord.gg/eccmazE

numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

3 Model B+

JhG123
150+ posts
150+ posts
Posts: 205
Joined: Mon Oct 29, 2018 8:20 pm

Re: New YPPH LiveATC build

Post by JhG123 »

Could of gone for some first generation ones and saved a few bucks :lol:
Unoffical WARSUG discord v2: https://discord.gg/eccmazE


numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

Image

Image

Image

Image

roland985
150+ posts
150+ posts
Posts: 209
Joined: Thu Aug 28, 2014 8:23 pm
Scanners and Receivers: Uniden EZI30XLT Scanner.
Bearcat UBC355XLT
Location: High Wycombe

Re: New YPPH LiveATC build

Post by roland985 »

How's progress?
WASES CSU

numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

Sorry, forgot to update. Yeah they are running well. Been up for a few months now with not that many issues.
I'll post some photos later on tonight when I can.

numloxx
Moderator
Moderator
Posts: 446
Joined: Fri Feb 25, 2005 3:39 pm
Location: Maylands, Perth, WA
Contact:

Re: New YPPH LiveATC build

Post by numloxx »

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Post Reply