Uniden 73xlt

What scanner to buy? What's the best antenna to use? Programming? Ask here!

Moderator: Always RX

Post Reply
baz666666
Posts: 2
Joined: Wed Dec 16, 2009 12:28 am
Scanners and Receivers: UNIDEN 73xlt

Uniden 73xlt

Post by baz666666 »

Hi people great forum so i bought a Uniden 73xlt and i was thinking about buying a better aerial

http://cgi.ebay.com.au/Mobile-Scanner-G ... 35a54523fa

And connecting it to a squid pole above the house just wondering whether it will be worth it.
robbage
Moderator
Moderator
Posts: 2993
Joined: Sat Feb 09, 2008 10:06 am
Amateur callsign: VK6UFO_VK6RN
Scanners and Receivers:  
Scanners/receivers
Diamond Welz WS1000 wideband handheld
Radioshack Pro 28 handheld
Uniden UBC72XLT handheld
Uniden UBC73XLT handheld
Uniden UBC330CRS desktop

Two-way
Yaesu VX-3R 2m/70cm Ham TRX and wideband RX handheld
Yaesu FT-1802M 2m Ham TRX mobile x 2
Yaesu FT-7800R 2m/70cm Ham TRX and wide band RX mobile
Icom IC-208H 2m/70cm Ham TRX and wide band RX mobile
Icom IC-706MKIIG all-band all-mode Ham TRX mobile
Icom IC-V85 2m VHF Ham TRX handheld
Wouxun KG-UVD1P VHF/UHF wideband Ham TRX handheld
Wouxun KG-679P VHF wideband Ham TRX handheld
Wouxun KG-713 UHF wideband Ham TRX handheld
Location: Just on the border of your waking mind

Re: Uniden 73xlt

Post by robbage »

That antenna is designed to mount on a windscreen or window the same way a car mobile phone antenna works. You'd probably be better off with a standard mount or an antenna that can be hanged (like a SCBASE) A squidpole will give you good height but the end pieces might be a bit thin for hanging a SCBASE. You could just remove the last section or two I guess.
As an alternative for hanging from a squidpole, you could run a coax up the pole and remove the last 500-1000mm of shielding. The centre conductor would act as the antenna.
Rob
OF78WD
 Amateur moderator
.
Arguing with a fool proves there are two
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:

Re: Uniden 73xlt

Post by vk6hgr »

I've had nothing but bad luck with on-glass antennas. They're really a compromise antenna for when you absolutely, positively can't use anything else. (Beats me why the Police use them on their marked vehicles)

As a compromise antenna, they have performance to match.
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
baz666666
Posts: 2
Joined: Wed Dec 16, 2009 12:28 am
Scanners and Receivers: UNIDEN 73xlt

Re: Uniden 73xlt

Post by baz666666 »

Thanks people i'm going to go with a Diamond RH 799 yeah i was thinking about that with the squid pole i will remove a couple of sections should still give me 3-4 meters to play with then run the RG58 cable down a unused chimney and if i dont get better reception i'll eat my own hat have to buy one first :).
robbage
Moderator
Moderator
Posts: 2993
Joined: Sat Feb 09, 2008 10:06 am
Amateur callsign: VK6UFO_VK6RN
Scanners and Receivers:  
Scanners/receivers
Diamond Welz WS1000 wideband handheld
Radioshack Pro 28 handheld
Uniden UBC72XLT handheld
Uniden UBC73XLT handheld
Uniden UBC330CRS desktop

Two-way
Yaesu VX-3R 2m/70cm Ham TRX and wideband RX handheld
Yaesu FT-1802M 2m Ham TRX mobile x 2
Yaesu FT-7800R 2m/70cm Ham TRX and wide band RX mobile
Icom IC-208H 2m/70cm Ham TRX and wide band RX mobile
Icom IC-706MKIIG all-band all-mode Ham TRX mobile
Icom IC-V85 2m VHF Ham TRX handheld
Wouxun KG-UVD1P VHF/UHF wideband Ham TRX handheld
Wouxun KG-679P VHF wideband Ham TRX handheld
Wouxun KG-713 UHF wideband Ham TRX handheld
Location: Just on the border of your waking mind

Re: Uniden 73xlt

Post by robbage »

The RH 799 is designed to connect straight onto the radio and probably won't be weather proof
Rob
OF78WD
 Amateur moderator
.
Arguing with a fool proves there are two
Post Reply