ICOM IC-R6 won't pickup 164.275Mhz

What scanner to buy? What's the best antenna to use? Programming? Ask here!

Moderator: Always RX

Post Reply
rcpilot23
Posts: 1
Joined: Tue Nov 16, 2021 7:24 pm
Scanners and Receivers: ICOM IC-R6

ICOM IC-R6 won't pickup 164.275Mhz

Post by rcpilot23 »

My ICOM IC-R6 won't pickup DFES 164.275Mhz yet my cheapo Baofeng does.

I'm using the stock antennas on both

thanks
vk6hgr
Site Admin
Site Admin
Posts: 2610
Joined: Thu Feb 24, 2005 10:33 pm
Amateur callsign: VK6HGR
Scanners and Receivers: Various Yaesu, Kenwood, Tait, Simoco and Philips'
Location: Perth, Western Australia
Contact:

Re: ICOM IC-R6 won't pickup 164.275Mhz

Post by vk6hgr »

The cheap radio will have a really sensitive receiver (which means it'll work terribly with cross-channel etc interference, but they don't care about that). 6AR/6IP is simulcast on a bunch of frequencies, any luck with any of the others?
Gavin Rogers; VK6HGR
http://vk6hgr.ampr.org/
WARSUG forum administrator
Site and stream donations: https://www.paypal.me/vk6hgr
Post Reply